Daikin Air Handlers and Coils | Air Conditioning, Heating, Air Quality

Installing the correct air handler or evaporator coil is essential for getting the highest level of comfort from your central air conditioning or heat pump system. Air handlers can ramp the motor up and down, regulating the output and ultimately delivering variable airflow and a steady temperature and humidity throughout your home, and can also equip you with exceptional control.

The evaporator coil typically lives on top of a furnace and provides a tremendously important function: as warm air passes over the cold coils, it cools the air, but also removes humidity.

Having a high-efficiency air handler and evaporator coil is a prime way to get the highest level of comfort from your central air conditioning or heat pump system. Make sure that your system is performing to its optimum level with our air handlers and evaporator coils.

DVPEC

DVPVC

DVPTC

ASPT

ARUF

MBVC

MBR

AWUF/AWUT

ACNF

CAPT

CAPF

CAUF

CHPF

CSCF

DVPEC Air Handler

The Daikin brand DVPEC Multi-Position, Variable-Speed, Inverter-Tuned Air Handler is part of our ComfortNet™ family of communicating units and is designed specifically for use with 18 SEER inverter outdoor equipment. This unit’s ECM indoor blower motor allows for a soft start and stop, offering a quiet, efficient operation while helping to reduce the cold blast of air upon heating start-up.

Features

Factory-Installed Electronic Expansion Valve
Variable-Speed Electrically Commutated Motor (ECM)
ComfortNet Compatible
Electronic Expansion Valve (EEV) for cooling and heat pump applications
Variable-speed ECM indoor blower motor
ComfortNet™ Communicating System compatible
Provides constant CFM over a wide range of static pressure conditions independent of duct system
CFM indicator
Thermostat provides adjustable low CFM for efficient fan-only operation
All-aluminum evaporator coil
Fault recall of six most recent faults
Improved humidity and comfort control compared to units without ECM or EEV
3 kW – 25 kW electric heater kits
Horizontal or vertical configuration capabilities
21 inch depth for easier attic access
DecaBDE-free thermoplastic drain pan with secondary drain connections
Screw-less sides and back helps to reduce condensation when installed in humid locations
Foil-faced insulation covers the internal casing to reduce cabinet condensation
Tool-less filter access
AHRI certified and ETL listed

DVPVC Air Handler

The Daikin brand DVPVC Multi-Position, Variable-Speed, Inverter-Tuned Air Handler is part of our ComfortNet™ family of communicating units and is designed specifically for use with 20 SEER inverter outdoor equipment. This unit’s ECM indoor blower motor allows for a soft start and stop, offering a quiet, efficient operation while helping to reduce the cold blast of air upon heating start-up.

Features

Factory-Installed Thermostatic Expansion Valve
Variable-Speed Electrically Commutated Motor (ECM)
ComfortNet Compatible
Compatible with the ComfortNet™ Communicating System family of products
Maximum four low-voltage wires required for operation in communicating mode
Auto configuration of the airflow and tonnage in communicating mode
Factory-installed
inverter-tuned thermal expansion valves
Variable-speed ECM indoor blower motor
All-aluminum evaporator coil
Provides constant CFM over a wide range of static pressure conditions independent of duct system
Provides adjustable low speed for efficient fan-only operation
CFM and diagnostic indicator with front-panel sight glass
Galvanized
leather grain-embossed finish
Foil-faced insulation covers the entire blower case to reduce operating sound and cabinet condensation
Multi-position installation: upflow
downflow or horizontal
AHRI certified; ETL listed

DVPTC Air Handler

The Daikin brand DVPTC Multi -Position, Variable – Speed Air Handler is part of our ComfortNet™ family of communicating units and optimized for use with the chlorine-free refrigerant, R-410A. This unit’s ECM indoor blower motor allows for a soft start and stop, which offers a quiet, efficient operation and helps reduce the cold blast of air upon heating start-up.

Features

ComfortNet™ Communicating System compatible
Variable-speed ECM indoor blower motor
Auto configuration of the airflow and tonnage in communicating mode
Provides constant CFM over a wide range of static pressure conditions independent of duct system
All-aluminum evaporator coil
Factory-installed thermal expansion valves
Built-in compatibility with multi-stage heat pump and cooling applications
Provides adjustable low speed for efficient fan-only operation
Improved humidity and comfort control
Rigid 21 deep cabinet for easy attic access
Multi-position installation: upflow / downflow or horizontal
Built-in coil has horizontal and vertical and downflow drain pans with secondary drain connections
Foil-faced insulation covers the internal casing to reduce cabinet condensation
AHRI certified and ETL listed

ASPT Air Handler

The Daikin brand ASPT Multi-Position, Multi-Speed Air Handler features a 21″ deep cabinet for easy attic access and includes a direct-drive, multi-speed motor for air volume variation. The ASPT may be installed in a variety of locations and configurations.

Features

All-Aluminum Evaporator Coil
Transformer and Blower Time-Delay
Factory-mounted TXVs
Compatible with the ComfortNet™ Communicating System family of products
Maximum four low-voltage wires required for operation in communicating mode
Auto configuration of the airflow and tonnage in communicating mode
Factory-installed
inverter-tuned thermal expansion valves
Direct Drive ECM indoor blower motor
All-aluminum evaporator coil
Provides constant CFM over a wide range of static pressure conditions independent of duct system
Provides adjustable low speed for efficient fan-only operation
CFM and diagnostic indicator with front-panel sight glass
Galvanized leather grain-embossed finish
Foil-faced insulation covers the entire blower case to reduce operating sound and cabinet condensation
Multi-position installation: upflow or downflow or horizontal
AHRI certified; ETL listed

ARUF Air Handler

The Daikin brand ARUF Multi-Position Air Handler features a 21″ deep cabinet for easy attic access. This unit includes a check flowrater expansion device as well as direct-drive, multi-speed motor for air volume variation. The ARUF is ideal for new or retrofit applications and may be installed in a variety of locations.

Features

All-Aluminum Evaporator Coil
Transformer and Blower Time-Delay
All-aluminum evaporator coil
Direct-drive – multi-speed PSC blower motor
Coil mounting track for quick repositioning
Rigid 21 inch deep cabinet for easy attic access
Screw-less sides and back reduces condensation
Foil-faced insulation covers the entire blower case to reduce operating sound and cabinet condensation
Multi-position installation: upflow / downflow or horizontal
Tool-less filter access accommodates standard-size filters
AHRI certified; ETL listed

MBVC Modular Blower

The Daikin brand MBVC modular blower is tailor-made for exceptional energy efficiency. Now fully compatible with the ComfortNet™ line of communicating equipment, the MBVC’s ECM indoor blower motor assemblies increase both installation and application flexibility. It can be matched with cased coils for upflow, downflow, and horizontal applications.

Features

ComfortNet™ Compatible
Built-in dehumidifying feature
Usable as an Electric Furnace
ComfortNet™ Communicating System compatible
MBVC: variable-speed ECM indoor blower motor
Provides constant CFM over a wide range of static pressure conditions independent of duct system
CFM indicator
Fault recall of six most recent faults
Built-in dehumidification feature
Blower section usable as an electric furnace
21 inch deep cabinet for easier attic access
Control board includes a blower time-delay in the cooling mode
Foil-faced insulation lines the cabinet to help reduce operating sound and cabinet condensation
Horizontal or vertical configuration

MBR Modular Blower

The Daikin brand MBR modular blower is tailor-made for exceptional energy efficiency. It can be matched with cased coils for upflow, downflow, and horizontal applications.

Features

Usable as an Electric Furnace
Multi-Position Installation
MBR: multi-speed PSC blower motor
Provides constant CFM over a wide range of static pressure conditions independent of duct system
CFM indicator
Fault recall of six most recent faults
Built-in dehumidification feature
Blower section usable as an electric furnace
21 inch deep cabinet for easier attic access
Control board includes a blower time-delay in the cooling mode
Foil-faced insulation lines the cabinet to help reduce operating sound and cabinet condensation
Horizontal or vertical configuration capabilities

AWUF/AWUT Wall-Mount

The Daikin brand AWUF/AWUT Air Handler is designed to be vertically wall- or stud-mounted. This unit features a check flowrater and direct-drive, multi-speed motor. The AWUF/AWUT is housed in a fully insulated, galvanized-steel cabinet.

Features

All-Aluminum Evaporator Coil
Sequence-controlled
Rust-resistant nickel chromium heating elements
All-aluminum evaporator coil
Direct-drive multi-speed motor allows air volume variation or heating/cooling
Multi-speed ECM indoor: AWUF 19 – 25 – 31 – 32 – 37 & AWUT 31 – 32 & 37
Multi-speed PSC motor: AWUF 18 – 19 – 30 – 36
AWUF equipped with a check flowrater
AWUT equipped with a fully adjustable TXV
Aluminum tubing coils on all model
Sequence-controlled rust-resistant nickel chromium heating elements
Thermoplastic drain pan with bottom primary and secondary drain connection
Factory-installed pull-type disconnect
Built-in filter rack (filter included)
Large chassis (2½- and 3-ton units) – front return only
Small chassis (1½- and 2-ton units) – front or bottom return
AHRI certified; ETL listed

ACNF Air Handler

The Daikin brand ACNF Electric Heat Air Handler is designed to be ceiling-mounted. This unit features a check flowrater and direct-drive, resilient-mount, multi-speed motor. The ACNF has galvanized-steel construction and quiet operation.

Features

All-Aluminum Evaporator Coil
Quiet Operation
Available with or without Heat
Equipped with a check flowrater
Direct-drive / resilient-mount / multi-speed motor
Sequence-controlled and rust-resistant nickel chromium heating elements
High-efficiency evaporator coil
Quiet operation
Available with and without heat
Primary/secondary drain connection in a high-temperature plastic drain pan
Factory-installed pull-type disconnect
Easy service access
AHRI certified; ETL listed

CAPT Cased Coils

The Daikin brand All-aluminum CAPT Cased coils with TXV option are made for split system air conditioners and heat pumps. This unit features aluminum tubing and corrugated aluminum fin coils and rust-resistant, high temperature, thermoplastic drain pans. The CAPT cabinet is painted nickel gray.

Features

Rust-Resistant High-Temperature Thermoplastic Drain Pan
Factory-Mounted TXV
Internal factory-installed thermal expansion valves (TXV) for cooling and heat pump applications
Rust-resistant high-temperature thermoplastic drain pans feature a low water-retention design
All-aluminum evaporator coil
Check flowrater for cooling and heat pump applications
Rifled aluminum tubing and corrugated aluminum fin coil
Galvanized
leather grain-embossed finish
21 depth for easier attic access
Upflow/downflow configuration
Foil-faced insulation covers the internal casing to reduce cabinet condensation
High-quality post-paint cabinet
Split-seam front for easy access
AHRI certified; ETL listed

CAPF Cased Coils

The Daikin brand All-aluminum CAPF Cased Upflow/Downflow Indoor Coils are made for split system air conditioners and heat pumps. This unit features aluminum tubing and corrugated aluminum fin coils and rust-resistant, hightemperature, thermoplastic drain pans. The CAPF cabinet is painted nickel gray.

Features

Rust-Resistant High-Temperature Thermoplastic Drain Pan
Check flowrater for cooling and heat pump applications
Rifled aluminum tubing and corrugated aluminum fin coil
All-aluminum evaporator coil
Galvanized
leather grain-embossed finish
Rust-resistant and high-temperature thermoplastic drain pans feature a low water-retention design
Upflow/downflow configuration
21 depth for easier attic access
Foil-faced insulation covers the internal casing to reduce cabinet condensation
Split-seam front for easy access
DecaBDE-free UV-resistant drain pan
UV-resistant drain pan
AHRI certified and ETL listed

CAUF Uncased Coils

The Daikin brand All-aluminum CAUF Uncased Upflow/Downflow Indoor Coils are made for split system air conditioners and heat pumps. This coil features aluminum tubing and corrugated aluminum fins and rust-resistant, high-temperature, thermoplastic drain pan.

Features

All-Aluminum Evaporator Coil
Rust-Resistant
High-Temperature Thermoplastic Drain Pan
Check flowrater for cooling and heat pump applications
All-aluminum evaporator coil
Rifled aluminum tubing and corrugated aluminum fin coil
21 inch depth for easier attic access
Upflow/downflow configuration
Rust-resistant and high-temperature thermoplastic drain pans feature a low water-retention design
UV-resistant drain pan
AHRI certified; ETL listed

CHPF Cased Coils

The Daikin brand All-aluminum CHPF Cased Horizontal “A” Coils are made for split system air conditioners and heat pumps. Each coil is made of quality galvanized steel with a painted, leather grain-embossed finish. This cabinet is painted Architectural Gray.

Features

Horizontal All-Aluminum Evaporator Coil
Rust-Resistant
High-Temperature Thermoplastic Drain Pan
Check flowrater for cooling and heat pump applications
Rifled aluminum tubing and corrugated aluminum fin coil
All-aluminum evaporator coil
Rust-resistant applications high-temperature thermoplastic drain pans feature a low water-retention design
Galvanized and leather grain-embossed finish
Horizontal configuration
21 depth for easier attic access
Foil-faced insulation covers the internal casing to reduce cabinet condensation
UV-resistant drain pan
Split-seam front for easy access
AHRI certified; ETL listed

CSCF Coils

The Daikin brand CSCF Horizontal Slab Evaporator Coils are made for split system air conditioners and heat pumps. This unit features a check flowrater expansion device and rust-resistant, high-temperature, thermoplastic drain pan. Each coil’s cabinet has a quality, galvanized-steel finish.

Features

Rust-Resistant
High-Temperature Thermoplastic Drain Pan
R-410A Refrigerant Compatible
Check flowrater for cooling and heat pump applications
All-aluminum evaporator coil
Rifled aluminum tubing and corrugated aluminum fin coil
Rust-resistant and high-temperature thermoplastic drain pan with secondary drain connection
Foil-faced insulation covers the internal casing to reduce cabinet condensation
Compact and versatile – right or left horizontal position
Copper sweat connections
UV-resistant drain pan
AHRI certified and ETL listed

We love hearing from our customers!

Customer Testimonials

If you've had us work on your HVAC system we would love to hear

“Had duct cleaning done today and they did a fantastic job. I have used this company for years and I would highly recommend them for any of their services”

Heat Pump Repair

in Olympia, WA 98512

Anna DePaul

“Within two hours of my call to G & G. Problem was diagnosed, repaired and my heat pump was running smoothly. Joe is a real pro. I can't imagine better service.”

Robin Vaupel

“William Barnett is awesome. It was a pleasure to meet him and deal with his workmanship. A bonus was, he was deployed in the same valley of Afghanistan as my wife and I . That was great!”

Air Conditioner Maintenance

in Lacey, WA 98513

Christopher Boettcher

“Shawn Gallo was knowledgeable and quick to fix the problem with my A.C. He answered all my questions and took photos of my equipment so he and G&G will be prepared to help in the future.”

Matt Tuttle